Home > Application > Industrial sheds > DC and DCeco heaters (electronic start-up), and DM heaters (manual start-up)


Gas fired, luminous infra-red heaters are the best solution for heating of large areas, whole buildings or localized areas (spot heating), both occasional and continuous heating. They are the best solution for heating of industrial sheds with production, assembly, storage and maintenace activities.



Print >

DC and DCeco heaters (electronic start-up), and DM heaters (manual start-up)

 
DC and DCeco heaters (electronic start-up), and DM heaters (manual start-up) 3653_CapannoniIndustriali.jpg

Careful design allows you to install these devices at very high heights, without sacrificing performance and comfort. Reflectors are made of reflective stainless steel for better heat transmission to the ground. You can centralize the start-up / stop of the heaters individually and control them by programmers and thermostats.

 

The radiant surface is made of micro-perforated ceramic plates with low polluting emission; plates rapidly reach high operating temperatures (approx. 900 °C), and design temperature of the area to be heated is reached within minutes. Security is guaranteed by automatic electronic ignition and flame control.

 


HEAT INPUT
model DC
model DCeco
model DM
7,2 kWatt DC 4 /08 DC 4 eco /08 DM 4 /08
9,6 kWatt DC 6 /08 DC 6 eco /08 DM 6 /08
16,1 kWatt DC 8 /08 DC 8 eco /08 DM 8 /08
18,3 kWatt DC 10 /08 DC 10 eco /08  
22,2 kWatt DC 12 /09 DC 12 eco /09  
34,4 kWatt DC 16 /08 DC 16 eco /08  
36,6 kWatt DC 10+10 /08 DC 10+10 eco /08  
44,4 kWatt DC 12+12 /09 DC 12+12 eco /09  
68,8 kWatt DC 16+16 /08 DC 16+16 eco /08  

All models are available in "on-off " or "two-stage" version, with 2 heating levels (approx. 75 and 100 %), which allows clear and important advantages:
   - better comfort for people
   - savings in gas consumption
   - fewer starts and stops
   - reserve power in case of particularly cold periods

 

Ideal for warehouses with precarious isolation. They can also be used as anti-freeze system for machines, anti-condensate plants in warehouses of semi-finished steel, and industrial process applications (heating, pre-heating, drying, etc.).

 

DC version of SIABS is made with a very robust structure suitable for "heavy" use, equipped with large reflectors for better efficiency in case of heating of localized areas. DCeco version of SIABS, with more lightly construction than DC version, represents a good compromise between cost and performance. For both version, security is guaranteed by an automatic electronic ignition and flame control.

 

DM version of SIABS, also with increased reflectors, it is the right solution for heating of small localised zones in industrial buildings, where you want to avoid the electric plant and gas pipeline. Start-up is manual with piezo-electric push-button, while the safety is guaranteed by a system with thermo-couple.

 

 

>>> Contact us for more information commerciale@siabs.it <<<