Print >
DS heaters
DS version of SIABS, with particular cared aesthetics, silent operation and very robust structure, is the right solution for heating all the places of worship, from Cathedrals to the small chapel, churches of all sizes, age and characteristics, Careful design allows you to install these devices at very high heights, without compromising comfort.
DS heaters are also used for heating of outdoor areas of bars, restaurants, etc. (non-smoking areas).

They are made of high temperature enameled steel, available in 3 different colours: IVORY, BROWN and GRAY, to ensure the best result in any architectural ambient, for more details SEE PHOTO GALLERY.
The radiant surface is made of micro-perforated ceramic plates with low polluting emission; plates rapidly reach high operating temperatures (approx. 900 °C), and design temperature of the area to be heated is reached within minutes. Security is guaranteed by automatic electronic ignition and flame control.

Can be provide a retractable system for complete removal of the device on the cornice, when not in use, in order to make the aesthetic impact close to zero.
MODEL |
HEAT INPUT |
| DS 4 /08 | 7,2 kWatt |
| DS 6 /08 | 9,6 kWatt |
| DS 8 /08 | 16,1 kWatt |
| DS 12 /08 | 19,0 kWatt |
| DS 12 /09 | 22,2 kWatt |
| DS 16 /08 | 32,2 kWatt |
All models are available in "on-off " or "two-stage" version, with 2 heating levels (approx. 75 and 100 %), which allows clear and important advantages:
- better comfort for people
- savings in gas consumption
- fewer starts and stops
- reserve power in case of particularly cold periods

Portable version is also available, series MR, with manual start-up, low-power for heating of small churches, in case you want to avoid the electrical and gas plants.

>>> Contact us for more information commerciale@siabs.it <<<


